AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

用 Raspberry Pi 設置一個輕便和便宜的 auto guider
回覆文章
頭像
mbike
主序星
文章: 187
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 mbike » 週二 11 12月, 2018 07:35

Thanks to the effort made by QK Sampson, AstroEx3 was upgraded from AstroEx2. AstroEx2 and AstroEx3 can control most Nikon and Canon Cameras (except my EOS M3). On AstroEx2 version, I modified some gphoto2 comands so my Canon EOS M3 can be operated.
Recently, I modified AstroEx 3 to control my M3 and 450D

The image can be downloaded at: https://drive.google.com/open?id=1cn-Bs ... pUL1gSP5lH. This image was working properly on raspberry pi Pi 3B and 3B+. Please notify us if your model of Canon EOS M works properly on this version.

Since I did not modified any web pages and scripts for previous workable Nikon and Canon models, this image shall be worked for them.

New feature:
Time lapse with time delay. Please set the camera in shutter speed other than bulb.

Limitation:
ISO cannot be set from AstroEX (gphoto2 --set-config ISO=XXX did not work). You have to set via buttons of EOS-M cameras.
Shall only support EOS M10, M100, M2, M3, M5, M50, M6 (http://gphoto.org/proj/libgphoto2/support.php), but the image was tested with my M3 only.

Upgraded:
Kernel from Linux 4.14.30-v7+ to Linux 4.14.87-V7+
gphoto2: 2.5.17 (M3 did not capture image properly via web control for version 2.5.20 and development version);
ligphoto2: 2.5.19 (M3 did not capture image properly via web control for version 2.5.20, 2.5.21 and development version);
raspex@astroex:~$ sudo apt-get update
raspex@astroex:~$ sudo apt-get dist-upgrade
The following NEW packages were installed:
libqt5keychain1 libqt5websockets5 libtiffxx5
The following packages were upgraded:
dnsmasq dnsmasq-base indi-asi indi-bin indi-eqmod indi-gphoto indi-mgen
indi-qhy kstars-bleeding kstars-bleeding-data kstars-bleeding-dbg
libindi-data libindi1 libqhy phd2 phdlogview
16 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.

Amendment files https://drive.google.com/open?id=1W4xVs ... bBVdpMZlh4 & script file for update https://drive.google.com/open?id=1Fmyb- ... DxsYKVoF1o
Hyperlink and wordings to web control for "preview capture of Canon M3" was added to index.php and gps.php.
"Upgrade gphoto2" script under other menu.

gphoto2 command for proper operations of EOS M3:
At least 2 second delay shall added after the gphoto2 command: gphoto2 --wait-event=2s
At least 4 second delay shall added after the --capture-image-and-download command: gphoto2 ... --capture-image-and-download=4s
astroexm3.png
AstroEx 3 for Canon EOS M. gphoto2 version.
astroexm3.png (381.86 KiB) 已瀏覽 543 次
Screenshot_2018-12-08-20-43-32.png
index.php
Screenshot_2018-12-08-20-43-32.png (130.34 KiB) 已瀏覽 543 次
Screenshot_2018-12-08-20-44-17.png
gps.php
Screenshot_2018-12-08-20-44-17.png (134.25 KiB) 已瀏覽 543 次
Screenshot_2018-12-08-20-44-50.png
capture preview for EOS M3, timelapse capture hyperlink
Screenshot_2018-12-08-20-44-50.png (119.57 KiB) 已瀏覽 543 次
Screenshot_2018-12-08-20-45-10.png
capture preview for EOS M3, timelapse capture hyperlink
Screenshot_2018-12-08-20-45-10.png (146.3 KiB) 已瀏覽 543 次
Screenshot_2018-12-08-20-51-05.png
Timelapse capture
Screenshot_2018-12-08-20-51-05.png (171.86 KiB) 已瀏覽 543 次
Screenshot_2018-12-08-20-52-47.png
Timelapse process log
Screenshot_2018-12-08-20-52-47.png (220.29 KiB) 已瀏覽 543 次
Screenshot_2018-12-08-20-54-00.png
Timelapse folder
Screenshot_2018-12-08-20-54-00.png (183.55 KiB) 已瀏覽 543 次
Screenshot_2018-12-08-21-36-47.png
Astrophoto capture
Screenshot_2018-12-08-21-36-47.png (113.27 KiB) 已瀏覽 543 次
Screenshot_2018-12-08-21-36-58.png
Astrophoto capture
Screenshot_2018-12-08-21-36-58.png (126.99 KiB) 已瀏覽 543 次

頭像
mbike
主序星
文章: 187
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 mbike » 週三 12 12月, 2018 14:03

Some files were modified for Canon EOS 450D. The kernel was upgraded to 4.14.87-v7. The new image is available for download.


astroex 450d.png
EOS 450D operation
astroex 450d.png (275.81 KiB) 已瀏覽 446 次

astroex kernel 41487v7.png
kernel was upgraded
astroex kernel 41487v7.png (396.85 KiB) 已瀏覽 446 次

sampson
紅巨星
文章: 366
註冊時間: 週二 16 7月, 2013 20:31

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 sampson » 週四 13 12月, 2018 23:15

[Good Job]

頭像
universe24
中子星
文章: 1924
註冊時間: 週五 11 7月, 2003 20:11
來自: Malaysia

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 universe24 » 週五 14 12月, 2018 09:30

太犀利了! [想入非非]

大黃傻貓GARFIELD
中子星
文章: 1599
註冊時間: 週日 11 9月, 2005 01:34

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 大黃傻貓GARFIELD » 週五 14 12月, 2018 10:51

感動.....

頭像
mbike
主序星
文章: 187
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 mbike » 週五 14 12月, 2018 21:58

mbike 寫:
週二 11 12月, 2018 07:35
ligphoto2: 2.5.19 (M3 did not capture image properly via web control for version 2.5.20, 2.5.21 and development version);
The main developer, Marcus Meissner replied:

"There was a bug I introduced in git... I fixed it in libgphoto2 git, it will be in 2.5.22.

Ciao, Marcus"

Once the bug is fixed, I shall burn a new image file for download.

回覆文章

回到「Raspberry Pi 自動導星裝置 diy Autoguiding」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 0 位訪客