AstroEx 3.3 was modified for controlling M3 and 450D.
Download AstroEx ver3.3 for EOS-M3 請使用 8G Class 10 或以上 SD card 燒錄
The image can be downloaded at:
https://drive.google.com/open?id=1FOLzV ... mC2o1bGTtR.
This image was working properly on raspberry pi Pi 3B+. Please notify us if your model of Canon EOS M works properly on this version.
Since I did not modified any web pages and scripts for previous workable Nikon and Canon models, this image shall be worked for them.
New feature:
Time lapse with time delay. Please set the camera in shutter speed other than bulb.
Limitation:
ISO cannot be set from AstroEX (gphoto2 --set-config ISO=XXX did not work). You have to set via buttons of EOS-M cameras.
Shall only support EOS M10, M100, M2, M3, M5, M50, M6 (http://gphoto.org/proj/libgphoto2/support.php), but the image was tested with my M3 only.
Changes / Upgraded:
- web interface for EOS M3 and 450D;
ligphoto2: 2.5.22.
Hyperlink and wordings to web control for "preview capture of Canon M3" was added to index.php and gps.php.
"Upgrade gphoto2" script under other menu.
gphoto2 command for proper operations of EOS M3:
At least 2 second delay shall added after the gphoto2 command: gphoto2 --wait-event=2s
At least 4 second delay shall added after the --capture-image-and-download command: gphoto2 ... --capture-image-and-download=4s