本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

用 Raspberry Pi 設置一個輕便和便宜的 auto guider
頭像
universe24
中子星
文章: 1921
註冊時間: 週五 11 7月, 2003 20:11
來自: Malaysia

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

文章 universe24 » 週四 05 4月, 2018 09:42

我是可以帮忙测试的,但要给我指示,例如如何 update version。由于没有接Pi到网络,所以一切下载都是在 Win 电脑里进行,然后 pendrive 进 Pi 的。
然后主要测试哪个部分,也要注明一下。
我手上能测试的是 1100D、70D、700D,6D勉强也可以找到来测试。

頭像
mbike
主序星
文章: 171
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

文章 mbike » 週四 05 4月, 2018 20:19

universe24 寫:
週四 05 4月, 2018 09:42
我是可以帮忙测试的,但要给我指示,例如如何 update version。由于没有接Pi到网络,所以一切下载都是在 Win 电脑里进行,然后 pendrive 进 Pi 的。
然后主要测试哪个部分,也要注明一下。
我手上能测试的是 1100D、70D、700D,6D勉强也可以找到来测试。
Option 1:
For simplicity, please copy phpcap.sh and preCap.sh to /home/raspex/DSLR_control and overwrite the original phpcap.sh and preCap.sh files. The gphoto2 and libgphoto2 will be maintained at version 2.5.15 & 2.5.12.

Option 2 (preferable):
Write the latest test image to a micro card and test it. The phpcap.sh, preCap.sh files, gphoto2 and libgphoto2 will be upgraded to version 2.5.15.1 & 2.5.16.1, a intervalmeter script and a shortcut on desktop will be installed.

Please test the following:
1. Actual exposure time against setting.
2. Preview function under Web control (the ISO setting in web control cannot alter the ISO setting in camera);
3. Multiple exposure under Web control.

Optional testing:
a. Intervalmeter script under desktop shortcut.
b. Canon driver under Indi server.

mbike

jameskm5
超新星
文章: 6
註冊時間: 週二 04 2月, 2014 09:54
來自: Hong Kong

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

文章 jameskm5 » 週日 15 4月, 2018 12:44

我也可以幚手測試,手上有5d and 700d

頭像
mbike
主序星
文章: 171
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

文章 mbike » 週日 15 4月, 2018 23:45

jameskm5 寫:
週日 15 4月, 2018 12:44
我也可以幚手測試,手上有5d and 700d
The download path of IMG was sent to you. Please enjoy testing.

Mbike

頭像
mbike
主序星
文章: 171
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

文章 mbike » 週五 27 4月, 2018 14:54

A script and a zip file were created for updating files for canon camera in AstroEx.
To simplify the process, an image file is available at https://drive.google.com/open?id=1uB3x0 ... KpHRasERxa . This image was tested with Canon M3 and Canon 80D.
The actual exposure time 0.1 second less than preset exposure time. Due to some commands could not be executed on M3, the ISO setting in webcontrol was disabled. You should set the ISO via camera buttons.
Screenshot_2018-04-27-12-59-01-799_com.realvnc.viewer.android.png
Screenshot_2018-04-27-12-59-01-799_com.realvnc.viewer.android.png (540.25 KiB) 已瀏覽 805 次

This script upgraded the gphoto2 and libgphoto2.
Screenshot_2018-04-27-13-33-38-342_com.realvnc.viewer.android.png
Screenshot_2018-04-27-13-33-38-342_com.realvnc.viewer.android.png (596.51 KiB) 已瀏覽 805 次

Both libraries were upgarded to development version 2.5.17.1 as this version support Canon M3 better than stable version 2.5.17.
Screenshot_2018-04-27-13-49-43-359_com.realvnc.viewer.android.png
Screenshot_2018-04-27-13-49-43-359_com.realvnc.viewer.android.png (361.21 KiB) 已瀏覽 805 次

The timelapse script was modified to dialog interface.
Screenshot_2018-04-27-13-34-56-738_com.realvnc.viewer.android.png
Screenshot_2018-04-27-13-34-56-738_com.realvnc.viewer.android.png (449.64 KiB) 已瀏覽 805 次

A script of littlebackup was modified. The SD card of canon cameras in a card reader was backup to an external harddisk automatically. The SD card shall be named as "EOS_DIGITAL" (the SD card will be named as "EOS_DIGITAL" if the card is formatted in a Canon camera.). The external harddisk shall be named as "extHD".
The SD card will be assigned a card_id and the files in SD card shall be copied to a corresponding folder with the same card_id.
Screenshot_2018-04-27-14-10-10-323_com.realvnc.viewer.android.png
Screenshot_2018-04-27-14-10-10-323_com.realvnc.viewer.android.png (392.59 KiB) 已瀏覽 805 次
Screenshot_2018-04-27-14-10-26-300_com.realvnc.viewer.android.png
Screenshot_2018-04-27-14-10-26-300_com.realvnc.viewer.android.png (491.6 KiB) 已瀏覽 805 次

頭像
mbike
主序星
文章: 171
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

文章 mbike » 週五 18 5月, 2018 20:56

sampson 寫:
週五 23 2月, 2018 23:20
Download AstroEx ver3 請使用 8G Class 10 或以上 SD card 燒錄

AstroEx ver3 更新到 ubuntu 18.04 LTS, 並更新了PHD2、 INDI server 、 QHY INDI driver、 ASI INDI driver 等等。Web control 內對 Canon 曝光控制的程式碼作出修改, 減低曝光時間誤差, 由於 planetary imager 、 Pentax control 不相容更新後的 ubuntu, 因此没有安裝。
現在 Wi-Fi 連接 AstroEx ver3 後, 可以直接用瀏覽器到 http://10.0.0.1 來將手機時間 sync time 到 AstroEx, 還可以從手機找到簡單的 GPS 位置。
Sampson:

Thanks for your effort on AstroEx version 3 :D

頭像
kwong
紅巨星
文章: 432
註冊時間: 週日 10 5月, 2009 07:53

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

文章 kwong » 週五 18 5月, 2018 21:39

越来越整合 :D

頭像
mbike
主序星
文章: 171
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

文章 mbike » 週三 23 5月, 2018 10:57

Please follow the below steps if you use Canon M3.
mbike 寫:
週五 27 4月, 2018 14:54
A script and a zip file were created for updating files for canon camera in AstroEx.
To simplify the process, an image file is available at https://drive.google.com/open?id=1uB3x0 ... KpHRasERxa . This image was tested with Canon M3 and Canon 80D.

The actual exposure time 0.1 second less than preset exposure time. Due to some commands could not be executed on M3, the ISO setting in webcontrol was disabled. You should set the ISO via camera buttons.

Steps
1. Download 2 patch files;
2. Copy 2 files to directory /home/raspex of micro SD card;
3. Connect pi via VNC. Open a terminal window;
4. type ./upgradecanon.sh
5. type 1 to upgarde to gphoto2 development version. (Both libraries will be upgraded to development version 2.5.17.1 & 2.5.18.1 as only these 2 version supporting Canon M3.)

回覆文章

回到「Raspberry Pi 自動導星裝置 diy Autoguiding」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 1 位訪客