如何stack LRGB

頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

如何stack LRGB

文章 kurt » 週六 19 9月, 2009 05:22

完全唔明 :cry: :cry:
Wah!!CF 可否祥細講講?? [蔥寶恭喜樣]

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週六 19 9月, 2009 08:36

最簡單係一張L和一張RGB的合成, 我用的軟件是Photoshop.
你俾兩張相我做示範

頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

文章 kurt » 週六 19 9月, 2009 13:46

how can I send it to you??

頭像
sn-10
中子星
文章: 1030
註冊時間: 週四 22 7月, 2004 13:21

文章 sn-10 » 週六 19 9月, 2009 13:52

1, Open both photos (your L and RGB) in photoshop.
2, Click on the L, ctrl A, ctrl c.
3, Click on the RGB, ctrol v.
4, you will see two layers on the RGB (you can close the L now); click on the top layer.
5, change blending mode to Luminosity.

That's it!
:wink:

頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

文章 kurt » 週六 19 9月, 2009 14:33

sn-10 寫:1, Open both photos (your L and RGB) in photoshop.
2, Click on the L, ctrl A, ctrl c.
3, Click on the RGB, ctrol v.
4, you will see two layers on the RGB (you can close the L now); click on the top layer.
5, change blending mode to Luminosity.

That's it!
:wink:
thanks sn-10 :D
because I am using Qhy 9 to take LRGB
after I finish the shoots with LRGB filter I will have four photos which are B/W (am iI right??)
so how to set the B/W RGB to real RGB??
I think I am so stupid to do the photo process :( :(

頭像
Nosneb
夸克星
文章: 2814
註冊時間: 週五 12 5月, 2006 13:31
來自: 中華人民共和國 香港特別行政區

文章 Nosneb » 週六 19 9月, 2009 14:52

搭單一句, RGB應該係用黑白相機+分別用紅綠藍filter拍成的照片, 但係請問L channel係乜東東呢? :oops:

頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

文章 kurt » 週六 19 9月, 2009 16:12

Nosneb 寫:搭單一句, RGB應該係用黑白相機+分別用紅綠藍filter拍成的照片, 但係請問L channel係乜東東呢? :oops:
L can be P-2,Ha ,uv/IR block

頭像
sn-10
中子星
文章: 1030
註冊時間: 週四 22 7月, 2004 13:21

文章 sn-10 » 週六 19 9月, 2009 17:23

kurt 寫:
sn-10 寫:1, Open both photos (your L and RGB) in photoshop.
2, Click on the L, ctrl A, ctrl c.
3, Click on the RGB, ctrol v.
4, you will see two layers on the RGB (you can close the L now); click on the top layer.
5, change blending mode to Luminosity.

That's it!
:wink:
thanks sn-10 :D
because I am using Qhy 9 to take LRGB
after I finish the shoots with LRGB filter I will have four photos which are B/W (am iI right??)
so how to set the B/W RGB to real RGB??
I think I am so stupid to do the photo process :( :(
I see. It's a bit tricky, you need to use "clipping masks"

Let try to summarize the procedure as follows:
1, Open all layers.
2, R is the base layer, paste G on top of R, and then B on top of G.
3, Close the G and B files.
4, Change the G and B layers to screen, keeping R to normal.
5, Go the R, change mode to RGB; then layer>new adjustment layer>hue/saturation
6, Click the clipping option, rename it to H/S R (or whatever name you want it for identification), then OK.
7, You will see the Hue/Saturation box pops up, select colorize, then enter the color values. For R channel, you can start with Hue:360 Sat:100 Lightness: -50.
8, OK.
9, Repeat 5-8 for G and B, except that the values for G and B are:
G: 120, 100, -20
B: 240, 100, -40
10, Flatten it.
11, Further tweaking the colors.
12, Paste the L on top of it for further processing.

Another way to do it is to re-mode all RGB at once separately, then extract one channel from each one to replace the original one to the other one. The principle is the same, however.

Hope that helps. :wink:

P.S. This is only my method, the accuracy is not ensured. I'm sure you can find other ways to do it from the internet.

頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

文章 kurt » 週六 19 9月, 2009 17:33

:shock: :shock:
it is very detail thanks a lot
thanks you for spent so many times on a stupid man
thank you thank you
I will try tonight [哭哭] [哭哭]

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週六 19 9月, 2009 20:20

呢個係我的做法:
附加檔案
LRGB_Combine_Lesson.gif
LRGB_Combine_Lesson.gif (1.19 MiB) 已瀏覽 12426 次

頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

文章 kurt » 週六 19 9月, 2009 20:42

thanks Wah!! thank you very much
十分感激你地
Wah!! CF 仲做埋動畫 [遠目] [遠目]

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

Re: 如何stick LRGB

文章 Subaru » 週六 19 9月, 2009 21:04

kurt 寫:完全唔明 :cry: :cry:
洗乜噤愁呀, 你用緊果隻software咪用來做呢樣嘢囖:
Image -> LRGB Color Synthesis -> 揀mode揀file -> Apply

頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

Re: 如何stick LRGB

文章 kurt » 週六 19 9月, 2009 21:32

Subaru 寫:
kurt 寫:完全唔明 :cry: :cry:
洗乜噤愁呀, 你用緊果隻software咪用來做呢樣嘢囖:
Image -> LRGB Color Synthesis -> 揀mode揀file -> Apply
係??等我試下先

頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

Re: 如何stick LRGB

文章 kurt » 週六 19 9月, 2009 21:53

kurt 寫:
Subaru 寫:
kurt 寫:完全唔明 :cry: :cry:
洗乜噤愁呀, 你用緊果隻software咪用來做呢樣嘢囖:
Image -> LRGB Color Synthesis -> 揀mode揀file -> Apply
係??等我試下先
係咪你都用緊果個??

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

Re: 如何stick LRGB

文章 Subaru » 週六 19 9月, 2009 22:23

kurt 寫:
kurt 寫:
Subaru 寫:
kurt 寫:完全唔明 :cry: :cry:
洗乜噤愁呀, 你用緊果隻software咪用來做呢樣嘢囖:
Image -> LRGB Color Synthesis -> 揀mode揀file -> Apply
係??等我試下先
係咪你都用緊果個??
我邊有你噤有米同高級玩LRGB, 同埋呢排好忙, 無機會影嘢.

Software方面有機會出去影嘢就會用呢個.

回覆文章

回到「天文圖像處理技巧 Astro Image Processing Technique」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 7 位訪客