平衡錘桿

回覆文章
頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

平衡錘桿

文章 Wah!! » 週四 20 9月, 2007 00:08

請問智通訂造如此一支平衡銲要多少$
若桿長改成 60cm 或 70cm 又要多少呢? :roll: :roll:
謝謝!
附加檔案
bar.GIF
bar.GIF (3.82 KiB) 已瀏覽 16423 次

Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

文章 Chanlunlun » 週四 20 9月, 2007 08:36

Dear Mr. Wah !!,

Why don't you make one by yourselves in the machine shop of the farm ? It won't take long to complete the job.

Best regards
Chan Yuk Lun

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週四 20 9月, 2007 08:41

Because I don't know where to buy a 13.5mm thick stainless steel stick in Hong Kong...

Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

文章 Chanlunlun » 週四 20 9月, 2007 09:21

Wah!! 寫:Because I don't know where to buy a 13.5mm thick stainless steel stick in Hong Kong...
Dear Mr. Wah !!,

Go to San Tin Day Street ( next to Canton Road ) in MongKok.

Best regards
Chan Yuk Lun

Tan14
原恆星
文章: 117
註冊時間: 週三 06 8月, 2003 03:03
來自: Tai Po
聯繫:

文章 Tan14 » 週四 20 9月, 2007 09:23

No such diameter standard rod in market, have to do machining.

* Is the thread size M14 x 1.5?
* Is rod body diameter of 13.5mm critical?
* Is diameter 14mm rod cannot pass through the bore hole on counterweight?

From my experience, normally the factory will not produce such "non-standard" size items. So I think the thread size is M14 x 1.5, made by a standard 14mm diameter rod. The CW bore hole diameter should be 14mm, too.

Let me know if there is anything that I can help on this matter :)

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週四 20 9月, 2007 09:48

Thank you Chanlunlun and Tan14.


"13.5mm" is just a guess number that I measured with a normal ruler...

The hole on the conuterweight is about 14mm, I'm not sure if a 14mm rod can pass or not, because I don't have a 卡尺 at home :oops: :oops: :oops:

Mr. Tan14, do you have any similar 14mm diameter rod? I need a long one to reduce the weight requirement of the counterweight. Thank you!

頭像
XR250
夸克星
文章: 6513
註冊時間: 週一 13 12月, 2004 09:43
來自: NT

文章 XR250 » 週四 20 9月, 2007 10:00

香港緯度低,小心枝棍大長,會撞到三腳架。

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週四 20 9月, 2007 10:46

I think it should be ok for my AR mount tripod. :)

LT
夸克星
文章: 2507
註冊時間: 週日 17 8月, 2003 23:20
來自: YL
聯繫:

Re: 平衡錘桿

文章 LT » 週四 20 9月, 2007 11:49

Wah!! 寫:請問智通訂造如此一支平衡銲要多少$
若桿長改成 60cm 或 70cm 又要多少呢? :roll: :roll:
謝謝!
Give me call tonight to have my suggestion if interested, and I can give you help too if you think me to be the right one.

LT

頭像
智通公司
紅巨星
文章: 336
註冊時間: 週一 21 7月, 2003 15:17

Re: 平衡錘桿

文章 智通公司 » 週五 21 9月, 2007 13:36

Wah!! 寫:請問智通訂造如此一支平衡銲要多少$
若桿長改成 60cm 或 70cm 又要多少呢? :roll: :roll:
謝謝!
您好:訂造如此一支平衡銲要100元.若桿長改成 60cm=120元 或 70cm =150元.谢谢!
Website: www.zhitong.net
Email: zhitong@zhitong.net , srztgs@hotmail.com
ICQ: 166677521
QQ: 82982902

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週日 23 9月, 2007 20:06

非常感謝樓上各位的意見和資料.

最後由於我急不及待, 昨天買了一條兩尺長, 4.5分粗的青銅支改做平衡桿.
http://www.hkastroforum.net/viewtopic.php?p=96455

頭像
智通公司
紅巨星
文章: 336
註冊時間: 週一 21 7月, 2003 15:17

文章 智通公司 » 週日 23 9月, 2007 23:00

谢谢告之!
Website: www.zhitong.net
Email: zhitong@zhitong.net , srztgs@hotmail.com
ICQ: 166677521
QQ: 82982902

回覆文章

回到「江西智通」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 8 位訪客