平衡錘桿
-
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
-
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
No such diameter standard rod in market, have to do machining.
* Is the thread size M14 x 1.5?
* Is rod body diameter of 13.5mm critical?
* Is diameter 14mm rod cannot pass through the bore hole on counterweight?
From my experience, normally the factory will not produce such "non-standard" size items. So I think the thread size is M14 x 1.5, made by a standard 14mm diameter rod. The CW bore hole diameter should be 14mm, too.
Let me know if there is anything that I can help on this matter
* Is the thread size M14 x 1.5?
* Is rod body diameter of 13.5mm critical?
* Is diameter 14mm rod cannot pass through the bore hole on counterweight?
From my experience, normally the factory will not produce such "non-standard" size items. So I think the thread size is M14 x 1.5, made by a standard 14mm diameter rod. The CW bore hole diameter should be 14mm, too.
Let me know if there is anything that I can help on this matter
Thank you Chanlunlun and Tan14.
"13.5mm" is just a guess number that I measured with a normal ruler...
The hole on the conuterweight is about 14mm, I'm not sure if a 14mm rod can pass or not, because I don't have a 卡尺 at home
Mr. Tan14, do you have any similar 14mm diameter rod? I need a long one to reduce the weight requirement of the counterweight. Thank you!
"13.5mm" is just a guess number that I measured with a normal ruler...
The hole on the conuterweight is about 14mm, I'm not sure if a 14mm rod can pass or not, because I don't have a 卡尺 at home
Mr. Tan14, do you have any similar 14mm diameter rod? I need a long one to reduce the weight requirement of the counterweight. Thank you!
Re: 平衡錘桿
您好:訂造如此一支平衡銲要100元.若桿長改成 60cm=120元 或 70cm =150元.谢谢!Wah!! 寫:請問智通訂造如此一支平衡銲要多少$
若桿長改成 60cm 或 70cm 又要多少呢?
謝謝!
Website: www.zhitong.net
Email: zhitong@zhitong.net , srztgs@hotmail.com
ICQ: 166677521
QQ: 82982902
Email: zhitong@zhitong.net , srztgs@hotmail.com
ICQ: 166677521
QQ: 82982902
非常感謝樓上各位的意見和資料.
最後由於我急不及待, 昨天買了一條兩尺長, 4.5分粗的青銅支改做平衡桿.
http://www.hkastroforum.net/viewtopic.php?p=96455
最後由於我急不及待, 昨天買了一條兩尺長, 4.5分粗的青銅支改做平衡桿.
http://www.hkastroforum.net/viewtopic.php?p=96455
谢谢告之!
Website: www.zhitong.net
Email: zhitong@zhitong.net , srztgs@hotmail.com
ICQ: 166677521
QQ: 82982902
Email: zhitong@zhitong.net , srztgs@hotmail.com
ICQ: 166677521
QQ: 82982902
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 20 位訪客