RegiStax 問題
RegiStax 問題
我想學疊相, 裝了RegiStax 5, 一用select選了照片(jepg)後就沒有反應(hang機), 改裝了RegiStax 3, 結果一樣是程式停止反應
我的中古年代電腦行 XP service pack 3, CPU是dual 2.66hz 1G RAM, 256K video RAM. 是電腦年老體力不支嗎?
停了反應如下, 上有檔名, 但半小時都沒有圖出。
我的中古年代電腦行 XP service pack 3, CPU是dual 2.66hz 1G RAM, 256K video RAM. 是電腦年老體力不支嗎?
停了反應如下, 上有檔名, 但半小時都沒有圖出。
- 附加檔案
-
- registax hang.JPG (71.02 KiB) 已瀏覽 3499 次
明白疊相的目的之一是改善訊噪比(s/n), 這是木星照片想處理的問題, 因為用了數碼放大, 過程中會引入雜訊, 但理論上每張相由放大引致的雜訊應是不同的, 那疊了應該會清晰一點。
另外一個可用的目的是改善constrast 或 dynamic range的問題, 概念如下:
http://www.dl-c.com/Temp/Press/PWP%205. ... Images.pdfThe usual goal of stacking bracketed exposures is to extend the dynamic range of the digital camera sensor or film you are using. For example, if the scene you are photographing contains very dark and very bright elements, you will often have to choose between good shadow detail and no highlight detail or good highlight detail and no shadow detail. By taking overexposed and underexposed photographs of the same scene you can overcome this limitation by combining the good highlight detail from the underexposed image with the good shadow detail from the overexposed image. ...
有錯請指正。
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 15 位訪客