小手工: 相機鏡頭用對焦網 (新增實地測試135mm)

自製天文儀器 望遠鏡腳架 赤道儀 杜蘇式<br> 開放式衍架式 鏡筒 望遠鏡配件 主鏡座 副鏡座
回覆文章
頭像
鄧登凳
夸克星
文章: 9493
註冊時間: 週一 03 8月, 2009 17:15
來自: 3rd planet of solar system

小手工: 相機鏡頭用對焦網 (新增實地測試135mm)

文章 鄧登凳 » 週六 09 10月, 2010 23:47

冇得上山, 又冇得出動, 只好做手工 :lol:

望遠鏡用Bahtinov mask, 可用橡皮筋將對焦網固定在鏡筒前, 但用於相機鏡頭, 這個方法有很多不便, 一來那裡的位置窄狹, 很難套牢, 二來相機的對焦環在那兒, 轉動時容易使橡皮筋鬆脫。

這可以作為一個較好的方案:

用料:
1. 相機用膠片濾鏡環, 本來還有一個夾片的方塊, 但那不用了, 只用這個帶62mm螺絲牙的環, 鴨寮街買的, $15。
2. 高影機(overhead projector)膠片印的Bahtinov mask, 剪出來;$1.1一張。
3. 雙面膠紙。

做法, 用雙面膠紙將對焦網膠片貼上去, 用小刀修邊(除去多餘的膠紙或膠片)。四分鐘完成。 :D

用遠景燈光試過, 效果達標。
附加檔案
BM for camera product.jpg
BM for camera product.jpg (99.07 KiB) 已瀏覽 9320 次
BM for camera material.jpg
BM for camera material.jpg (99.67 KiB) 已瀏覽 9320 次
最後由 鄧登凳 於 週四 14 10月, 2010 23:38 編輯,總共編輯了 2 次。

頭像
wtyu21
夸克星
文章: 5933
註冊時間: 週三 30 5月, 2007 04:18
來自: HKCHN

文章 wtyu21 » 週日 10 10月, 2010 00:31

GOOD 就是怕高影機膠片材質不均勻又有散射會影響對焦精度! :roll: :roll: :roll:

HK.Raymond.Tse
中子星
文章: 1090
註冊時間: 週一 11 8月, 2003 16:10

文章 HK.Raymond.Tse » 週日 10 10月, 2010 00:36

The problem is not how to mount the Bhatinov mask but how to achieve accurate focus when the mask is being used.

When I try to use the mask with 135mmF2, the star spikes are just too small or too faint to see (compared to long focal length > 300 -400mm).

Any suitable programme to check Bhatinov Mask when short focal length lens is to be used ?

Raymond

頭像
Skyobs
白矮星
文章: 724
註冊時間: 週日 16 9月, 2007 22:37
來自: HKSAR

文章 Skyobs » 週日 10 10月, 2010 01:10

Narrower slit makes bigger diffraction and hence longer spike. Using printed mask is a good idea because slits can be made very narrow. I haven't tried yet, but it should work.

頭像
鄧登凳
夸克星
文章: 9493
註冊時間: 週一 03 8月, 2009 17:15
來自: 3rd planet of solar system

文章 鄧登凳 » 週日 10 10月, 2010 01:13

HK.Raymond.Tse 寫:The problem is not how to mount the Bhatinov mask but how to achieve accurate focus when the mask is being used.

When I try to use the mask with 135mmF2, the star spikes are just too small or too faint to see (compared to long focal length > 300 -400mm).

Any suitable programme to check Bhatinov Mask when short focal length lens is to be used ?

Raymond
Dear Raymond,

I have made one for my 135mm lens as well. The lines are very fine (0.3mm for one black and one transparent). For this level of fineness, cutting methods are not likely to work.

My printed one worked in live view with distance street lights.

I will star test it when the weather allows and will up load some photos by then.

Regards,
Tang

頭像
marco1415
白矮星
文章: 766
註冊時間: 週五 04 6月, 2004 01:22
來自: hong Kong

文章 marco1415 » 週日 10 10月, 2010 01:23

good idea!! :lol:
但個綱怎樣造呀唔該?

頭像
鄧登凳
夸克星
文章: 9493
註冊時間: 週一 03 8月, 2009 17:15
來自: 3rd planet of solar system

文章 鄧登凳 » 週日 10 10月, 2010 01:32

marco1415 寫:good idea!! :lol:
但個綱怎樣造呀唔該?
這裡有個網頁可以按焦距和大小產生一個Bahtinov mask: http://www.hkastroforum.net/viewtopic.php?t=17083

再用鐳射印字機印在耐熱高影機膠片上, 先印出再用碳粉影印機印到耐熱高影機膠都可以。

用於望遠鏡的, 旁邊留膠條, 用橡皮圈套上便可。(你好像在PTC用過我的mask)

頭像
Eddy So
夸克星
文章: 16057
註冊時間: 週四 04 12月, 2008 22:35
來自: 中男海

文章 Eddy So » 週日 10 10月, 2010 12:46

請問鄧Sir:以下這編有關Meade DSI文章的第6頁,其中提及的Hartmann Mask,是否可行?
http://www.cloudynights.com/documents/ds1.pdf
附加檔案
2 holes mask.jpg
2 holes mask.jpg (86.98 KiB) 已瀏覽 9156 次

頭像
鄧登凳
夸克星
文章: 9493
註冊時間: 週一 03 8月, 2009 17:15
來自: 3rd planet of solar system

文章 鄧登凳 » 週日 10 10月, 2010 14:00

Eddy So 寫:請問鄧Sir:以下這編有關Meade DSI文章的第6頁,其中提及的Hartmann Mask,是否可行?
http://www.cloudynights.com/documents/ds1.pdf
理論上是可行的, 不合焦時星點會一分為二, 合焦時是一點。

但是不合焦是在焦點前還是後, 就不得而知, 所以可以在很接近焦點的前前後後弄很多次都不能完全對焦(Bahtinov mask的好處是焦點前和後時, 中間的一條光位置不同的。)

這可方法, 用CCD入電腦, 一兩秒一幅的, 還可以循著過程去看, 用沒有即時圖像(live view)的DSLR, 會是漫長的痛苦經驗。

頭像
鄧登凳
夸克星
文章: 9493
註冊時間: 週一 03 8月, 2009 17:15
來自: 3rd planet of solar system

文章 鄧登凳 » 週日 10 10月, 2010 23:34

Skyobs 寫:Narrower slit makes bigger diffraction and hence longer spike. Using printed mask is a good idea because slits can be made very narrow. I haven't tried yet, but it should work.
It is working with 135mm lens. The slits are very narrow, about 3 black strips in 1mm. The following show how such a printed Bahtinov mask can help to achieve focus.

The photos were taken with 450D, ISO400, 4s with Cosina 135mm f/2.8. Street lights on Hong Kong Island were taken from Kowloon.

No spike can be observed. What focusing depended on are six bright dots and six dim dots surrounding a street lamp. These dots have a pattern of 3 dots in a small arc of a circle. The central dot moves with respect to the focusing position. Out of focus, the central dot is more close of one of the dot on the arc than the other. When focused, the central dot is at equal distance to the two other dots on the arc. During the movement of the focusing ring, the central dot move from one side to the centre than to the other side.

The three photos (100% corp) show the transition from before focus, very close to the focus and slightly overshooting the focus.

P.S. In order to have more easy judgment of the dot positions, the Bahtinov mask is printed using an angle of 35 degrees instead of the standard 20 degrees.
附加檔案
focusing over.jpg
focusing over.jpg (98.73 KiB) 已瀏覽 9055 次
focused 98%.jpg
focused 98%.jpg (70.03 KiB) 已瀏覽 9055 次
focusing before.jpg
focusing before.jpg (103.17 KiB) 已瀏覽 9055 次

頭像
鄧登凳
夸克星
文章: 9493
註冊時間: 週一 03 8月, 2009 17:15
來自: 3rd planet of solar system

文章 鄧登凳 » 週四 14 10月, 2010 23:35

實地測試:

由未對焦 --> 接近焦點 --> 當對了焦 (電腦放大看, 其實得97% :oops: ) [圖是100% corp]
(實質以此焦點設定的拍攝結果: http://www.hkastroforum.net/viewtopic.p ... 071#203071)

kenyuen師兄在550D試用, 則在即時圖像(live view)見木星的米字光。
附加檔案
Star assumed focused ~96%.jpg
Star assumed focused ~96%.jpg (66.12 KiB) 已瀏覽 8869 次
Star nearly focused.jpg
Star nearly focused.jpg (33.64 KiB) 已瀏覽 8869 次
Star-out-focus.jpg
Star-out-focus.jpg (20.71 KiB) 已瀏覽 8869 次

回覆文章

回到「自製天文儀器 diy Astro Equipment」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 7 位訪客