source:
http://www.dchome.net/viewthread.php?ti ... 3D1&page=1
原文:
http://www.dchome.net/viewthread ... page%3D1&page=1
基於原文ä¸çš„連çµåŠæª”案比較錯亂, 亦沒有在文ä¸è©³è§£, 所以開個新帖整ç†ä¸€ä¸‹.
本人親身試éŽå‘¢å€‹hack, 真係好好用, ä¸éŽå®‰è£æ–¹ä¾¿è©±æ˜“唔易, 話難唔難...
但係為左ISO 3200 (åŠå…¶ä»–ISO值, 如80, 320, 640),
Spot metering, shutter count 辛苦少少值得ï¼
QUOTE:DETAILED HOWTO.
1. use a fully charged battery. you need CF card reader and windows. on a mac, use windows under bootcamp/vmware fusion.
2. update to latest firmware (1.1.1) by downloading the latestfirmware, copying it into the root of CF, and running "update firmware"in the setup menu.
3. empty your CF, download testfir.fir and copy it into the root of your CF.
4. insert CF, and then run firmware update again using testfir.fir thescreen will go blank. wait 10 seconds, turn off, take battery out andback in.
5. insert CF into card reader and perform a quick format.
6. IF Card <= 4GB (fat12/fat16)
download cardtricks: http://chdk.wikia.com/wiki/Cardtricks run it, choose CF drive, tick "cf boot sector" and then click "make bootable."
ELSE IF card > 4GB (fat32)
use HxD : http://mh-nexus.de/en/downloads.php?product=HxDrun as administrator, goto extras -> options -> security ->uncheck "open disk as readonly by default", then open CF card using the5th button (cd, floppy and HDD icon) in the toolbar, then carefullywrite "EOS_DEVELOP" at 0x47 and "BOOTDISK" at 0x5C. save and exit.
7. download autoexec.bin and copy it into CF.
8. safely remove CF, insert it into camera, if the blue print led ofthe camera briefly lights up when the camera is turned on, the hack issuccessfully loaded.
9. to use additional ISO values, choose one of the100,200,400,800,1600, and then push the print button to access moreISOs. (80/100/125/160/200/250/320/400/500/640/800/1000/1250/1600/2000/2500/3200)
ISO levels 16/32/40/50 can also be enabled if you go to menu and turn"shoot without CF" ON, but not sure if they really work (i see nodifference.)
10. to use spot metering, go to metering selection screen, then pushthe print button. to go back to "evaluative metering", you have toselect other metering modes first, and then back to "evaluativemetering", because the camera thinks you are at "evaluative" althoughyou are at "spot metering".
11. to view shutter actuation count, which was only viewable by canonthemselves, go to menu, push print button, push menu button againtwice, ("factory menu" appears), enter factory menu, then push printbutton to enter "debug mode". after a beep, go back and set spotmetering. and you will see the camera writing something to the CF (CFlight). eject CF, insert it into card reader, you will see a filecalled STDOUT.txt, search the textfile for "Release". there you see anumber and that is the shutter count.
thanks very much thaibv and Foldesa of CHDK for this wonderful hack.
- raingrove
安è£æ–¹æ³•:
1. (開始å‰æº–å‚™)å……æ»¿é›»çš„é›»æ± , CFå¡, 讀å¡å™¨
2. (å¦‚æžœä½ çš„firmware version已經是1.1.1, å¯è·³éŽæ¤æ¥é©Ÿ)更新至最新firmware(1.1.1):
http://web.canon.jp/imaging/eosdigital3 ... are-e.html
-- 下載åŠè¤‡åˆ¶åˆ°CFå¡çš„æª”æ¡ˆæ ¹(root), 執行setup menuçš„update firmware
3. å¿«é€Ÿæ ¼å¼åŒ–CFå¡, 把testfir.fir放到CFå¡å…§
4. 用testfir.firå†æ¬¡åŸ·è¡Œupdate firmware. ç•«é¢æœƒè®Šé»‘, ç‰10秒, 關機, å–出åŠæ”¾å›žé›»æ±
5. å†å¿«é€Ÿæ ¼å¼åŒ–CFå¡
6. IF Card <= 4GB (fat12/fat16)
下載 cardtricks: http://chdk.wikia.com/wiki/Cardtricks 安è£åŠåŸ·è¡Œ, é¸æ“‡ CF drive, 標記 "CF boot sector" 然後按 "Make Bootable."
ELSE IF card > 4GB (fat32)
下載 HxD : http://mh-nexus.de/en/downloads.php?pro ... «ä»½åŸ·è¡Œ, 到 extras -> options -> security ->uncheck "open disk as readonly by default", 然後使用toolbarä¸ç¬¬5個按鈕(cd,floppy and HDD icon) 打開CF å¡, 在0x47寫上 "EOS_DEVELOP"; 在0x5C寫上"BOOTDISK".SAVE然後離開.
7. 把autoexec.bin放入CFå¡å…§
8. 把CFå¡æ”¾é€²ç›¸æ©Ÿ, 如開機時è—色燈閃çˆäº†ä¸€ä¸‹å³è¡¨ç¤ºç ´è§£æˆåŠŸï¼
使用方法:
Additional ISO values: é¸æ“‡ISO menuä¸çš„ 100,200,400,800,1600,然後按directprint 會出ç¾æ›´å¤šISO值 (80/100/125/160/200/250/320/400/500/640/800/1000/1250/1600/2000/2500 /3200);到 menu é¸"shoot without CF" ON å¯ä½¿ç”¨ ISO 16/32/40/50
Spot metering: 到metering menuä¸æŒ‰direct print一下å³è®ŠæˆSpot metering. 復原方法: 到metering menuä¸è½‰æ›å…¶ä»–metering mode, å†é¸å›ževaluative metering
View shutter count: 到menuä¸æŒ‰ direct print, å†æŒ‰menu兩次, (會出ç¾"factorymenu"), 進入 factory menu, å†æŒ‰print button 進入 "debug mode". è½åˆ° beep一è²,出番去set spot metering. CF燈會閃çˆä¸€ä¸‹ . 退出CF放到電腦ä¸, æœƒç™¼ç¾ STDOUT.txt, 打開然後æœå°‹"Release" (Ctrl+F). 後é¢çš„數å—å°±æ˜¯ä½ çš„shutter count.
è½‰å€‹å¸–ä¾›å¤§å®¶ç ”ç©¶:400Dfirmware hack,support ISO16-3200&spot meter
- MythPlayer
- 主序星
- 文章: 233
- 註冊時間: 週二 30 12月, 2008 19:46
- 來自: 痿大天朝
è½‰å€‹å¸–ä¾›å¤§å®¶ç ”ç©¶:400Dfirmware hack,support ISO16-3200&spot meter
- 附加檔案
-
- 我的æˆæžœ
- Image1157.jpg (152.99 KiB) 已瀏覽 3325 次
-
- 4G和以上的cf card在HXD上的改法
- 486608_1252336016.jpg (214.36 KiB) 已瀏覽 3325 次
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 17 位訪客