請教: 一部電腦可同時支持多少個天文相機?

電腦.電子手帳PDA.iphone.ipod
回覆文章
頭像
鄧登凳
夸克星
文章: 9493
註冊時間: 週一 03 8月, 2009 17:15
來自: 3rd planet of solar system

請教: 一部電腦可同時支持多少個天文相機?

文章 鄧登凳 » 週三 18 4月, 2012 11:47

有沒有同好試過同一電腦同時支援多部CCD/CMOS做天體拍攝。

以往的Meade Autostar Suit Envisage是可以同時支援多部CCD拍攝的, 但只限用Meade的相機。

現時用的Nebulosity2, 似乎只可用一部相機拍攝, 但仍會支援PHD的guide camera。

用iTelescope是一望遠鏡一電腦的。但很可能考慮是系統出問題時影響較輕。

現時保安用的電腦加多個Web Cams系統, 很多都支援十多部同時拍攝並錄影的相機。即電腦速度不是問題。

那有沒有同好試過一部電腦支援多部拍攝的相機呢? 如有, 希望分享經驗。

另一問題是, 同一電腦可以支援兩個同時運作的PHD-guiding嗎? 或兩個不同的導星但用不同軟體(如PHD和guide-dog)又可行嗎? 如果可以, 那就小圈子活動有人電腦壞都可以大家有得玩啦。

anyone
夸克星
文章: 14338
註冊時間: 週六 07 2月, 2009 12:13
來自: hong kong

文章 anyone » 週三 18 4月, 2012 12:07

這個有趣的問題,上個月去紅土地是和同好討論過;結果當然係無結論啦,原因係唔識和唔知,嘻嘻! :P

kai
白矮星
文章: 849
註冊時間: 週五 28 3月, 2008 15:35

文章 kai » 週三 18 4月, 2012 14:04

必須要有電腦各方面資料先可以玩 ....... 如果有人玩 raid ,harddisk 無限大 已經唔可以計數 ...... :p

頭像
鄧登凳
夸克星
文章: 9493
註冊時間: 週一 03 8月, 2009 17:15
來自: 3rd planet of solar system

文章 鄧登凳 » 週三 18 4月, 2012 14:41

kai 寫:必須要有電腦各方面資料先可以玩 ....... 如果有人玩 raid ,harddisk 無限大 已經唔可以計數 ...... :p
以一部基本notebook來說吧, dual core CPU (2.1GHz, 3MB cache, hyperthread), 2GB RAM (independent graphic RAM), 500GB Hard Disk (300GB free space), 用時關掉一切不必要軟件(包括上網、防毒等), Notebook玩RAID較少有吧.... 應該電腦速度不是問題吧 :roll:

PTS
夸克星
文章: 17243
註冊時間: 週日 28 10月, 2007 08:50
來自: HK

Re: 請教: 一部電腦可同時支持多少個天文相機?

文章 PTS » 週三 18 4月, 2012 15:29

鄧登凳 寫:有沒有同好試過同一電腦同時支援多部CCD/CMOS做天體拍攝。

以往的Meade Autostar Suit Envisage是可以同時支援多部CCD拍攝的, 但只限用Meade的相機。

現時用的Nebulosity2, 似乎只可用一部相機拍攝, 但仍會支援PHD的guide camera。

用iTelescope是一望遠鏡一電腦的。但很可能考慮是系統出問題時影響較輕。

現時保安用的電腦加多個Web Cams系統, 很多都支援十多部同時拍攝並錄影的相機。即電腦速度不是問題。

那有沒有同好試過一部電腦支援多部拍攝的相機呢? 如有, 希望分享經驗。

另一問題是, 同一電腦可以支援兩個同時運作的PHD-guiding嗎? 或兩個不同的導星但用不同軟體(如PHD和guide-dog)又可行嗎? 如果可以, 那就小圈子活動有人電腦壞都可以大家有得玩啦。
This is a tricky question.
For one computer to control more than one camera, it is not simply a question of the processing power of the PC, because the present day PC is much more powerful than a mainframe 10 years ago.

In Security Monitoring video systems, we can have many cameras but they are using sequential operations.

Many of these hardware control will make use of interrupts of the CPU. In most CPU's, only a very small number of interrupts are available for user, as most of them are used by the system or system programmes.

If we can customize the camera software to use DIFFERENT interrupts, then there is no reason why we cannot connect more than one camera.
However, this is easier said than done. Most of these camera software (as they are of the same type of hardware) use the SAME interrupt. When 2 devices that use the same interrupt are connected at the same time, the PC will crash, or hang.

For USB cameras, we can simply do an experiment by connecting several cameras and check if it works.


pts

回覆文章

回到「電腦資訊科技 Information Technology」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 8 位訪客