自制家用天文台 --- MANDII

自製和廠制天文台
回覆文章
頭像
MANDII
夸克星
文章: 2951
註冊時間: 週二 28 7月, 2009 15:13
來自: HK

自制家用天文台 --- MANDII

文章 MANDII » 週四 03 9月, 2009 16:53

Purpose :

- To make an obseravtory room on the home platform for storage of all the atronomy equipments ( Telescope & moult , networked PC , cameras and other auxillaries )
- To observe the sky at night .
- To provide a small reading room and room to make plastic models on day time .
- The room should be large enough to sit for at least two persons .( No need for standing inside )
- The room is heat insulated in day time and highly water proof .
with strong wind substantion .

Components :
波离钢 halfly-opened Dome , iron circular railway , aluminium door and red-block circula building wall .

Method :
Self Design
Dome , iron railway , aluminum door 订造 in shenzhen .
The red-block wall is made by own in HK .

Total cost : 2200 RMB ( Dome)
2500 RMB ( iron circular railway)
600 RMB ( aluminum Door )
600 RMB ( white heat insulation painting )
800 HKD ( transport SZ->HK)
500 HKD ( cicular wall cement )
Total : 8000 HKD


Target finish date : october 2009
附加檔案
3406_0001.JPG
3406_0001.JPG (622.05 KiB) 已瀏覽 31619 次
dome_base_3.TIF
(36.54 KiB) 已下載 4756 次
3408_0001.TIF
(38.92 KiB) 已下載 4738 次
dome.JPG
dome.JPG (614.3 KiB) 已瀏覽 31619 次
3403_0001.JPG
3403_0001.JPG (1.12 MiB) 已瀏覽 31619 次

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週四 03 9月, 2009 17:10

打算兩個月完成, 好快哦!

頭像
MANDII
夸克星
文章: 2951
註冊時間: 週二 28 7月, 2009 15:13
來自: HK

文章 MANDII » 週四 03 9月, 2009 17:11

more :lol:
附加檔案
3408_0001.TIF
(38.92 KiB) 已下載 4840 次

頭像
MANDII
夸克星
文章: 2951
註冊時間: 週二 28 7月, 2009 15:13
來自: HK

文章 MANDII » 週四 03 9月, 2009 17:15

more photos :lol:
附加檔案
dome_base_2.JPG
dome_base_2.JPG (519.81 KiB) 已瀏覽 31596 次
door.JPG
door.JPG (522.18 KiB) 已瀏覽 31596 次
3408_0001.TIF
(38.92 KiB) 已下載 4771 次

頭像
Eddy So
夸克星
文章: 16045
註冊時間: 週四 04 12月, 2008 22:35
來自: 中男海

文章 Eddy So » 週四 03 9月, 2009 17:41

請問你有沒有做玻璃纖維方面的經驗?

頭像
MANDII
夸克星
文章: 2951
註冊時間: 週二 28 7月, 2009 15:13
來自: HK

文章 MANDII » 週四 03 9月, 2009 17:47

No , I ask china guy to make it .
In shenzhen , they are making now .

頭像
Eddy So
夸克星
文章: 16045
註冊時間: 週四 04 12月, 2008 22:35
來自: 中男海

文章 Eddy So » 週四 03 9月, 2009 17:55

MANDII 寫:No , I ask china guy to make it .
In shenzhen , they are making now .
如果你是訂做的話,價錢有點過份便宜,玻璃纖維實際價錢比鋼材還要貴。
補充:如果祇是用玻璃纖維做小圓頂,那麼¥2,800也算合理。
最後由 Eddy So 於 週四 03 9月, 2009 20:41 編輯,總共編輯了 2 次。

anguslau
中子星
文章: 1188
註冊時間: 週五 15 4月, 2005 20:18

文章 anguslau » 週四 03 9月, 2009 19:10

This appears to be a very small dome with very low profile. Are you sure you can easily maneuver inside with your equipment? Your scope probably is quite small as well. It will also limit your mount to be a fork or alt-azi type. I think it will be difficult to fit a german mount inside. Just some off-the-cuff feelings... :roll:

頭像
funoooo
夸克星
文章: 7831
註冊時間: 週五 30 6月, 2006 16:34
聯繫:

文章 funoooo » 週四 03 9月, 2009 19:56

如果做得好, 你的幫手就大把生意. :shock:

頭像
MANDII
夸克星
文章: 2951
註冊時間: 週二 28 7月, 2009 15:13
來自: HK

文章 MANDII » 週五 04 9月, 2009 10:06

Only the Dome is made by 波离钢 .
The diameter of dome is 1M , height is around 0.5M .
2000 RMB not include the transportation charges .


The circular room or wall is 2M in diameter . Height is 1.13M .
And the Dome is put over the room .

During my design stage , I have considered very seriously the size of the whole 天文台 . Such size is enough for all kinds of usage . And also most safety for long term usage . You know too high building is no good ( danger ) and too large(e.g 2M) of the Dome is also no good . Total height of the building is around 1.75M . Altough standing inside is not really comfortable but normally sitting inside during night observation or daytime working inside is pretty enough . Laying down inside for sleeping is also considered of 2M diameter . The room is enough to be occupied around 3 to 4 persons sitting inside at same time .

Finally , the most important part for this room is that it is highly heat insulated by using a very special heat resistant coating( 600RMB) .This coating is an adanced technology so far in china which can reduce inside temperature to around 20 degree less than outside surface . Thus , working or doing things in day time is possible during summer time .




:D

頭像
MANDII
夸克星
文章: 2951
註冊時間: 週二 28 7月, 2009 15:13
來自: HK

文章 MANDII » 週五 04 9月, 2009 10:26

German mount should be no problem to put in . Total height of the building include the Dome is around 1.75M

頭像
funoooo
夸克星
文章: 7831
註冊時間: 週五 30 6月, 2006 16:34
聯繫:

文章 funoooo » 週五 04 9月, 2009 11:05

MANDII 寫:German mount should be no problem to put in . Total height of the building include the Dome is around 1.75M
How's about the person? How do anyone get to inside the dome?
I think that is too small. :shock:

頭像
XR250
夸克星
文章: 6513
註冊時間: 週一 13 12月, 2004 09:43
來自: NT

文章 XR250 » 週五 04 9月, 2009 11:28

去年在台灣都見過一個小型的dome, 大小剛好跟MANDII 的差不多。
附加檔案
2008TW_starparty_small_dome.jpg
2008TW_starparty_small_dome.jpg (73.52 KiB) 已瀏覽 31368 次

頭像
MANDII
夸克星
文章: 2951
註冊時間: 週二 28 7月, 2009 15:13
來自: HK

文章 MANDII » 週五 04 9月, 2009 11:28

The mount can be shortened on the leg . Plus the telescope I think should not be over 1.75 M . And also , pls don't forget I just sitting inside . There is still have 2M diameter room . Although I haven't had a german moult so far , I even do not have a telescope . I just have my binocula(10X50) which is put over my observating table , And the table in future can be put inside the new room . Of course , this is a life lasting hobby , in future I will definitely buy those equipments . I had checked the german moult size (e.g Meade ED75 ) , I think it should be enough for me for such room size .

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週五 04 9月, 2009 11:42

台灣個DOME應該無兩米直徑吧?
價錢又要幾多呢?

回覆文章

回到「天文台 Observatory」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 5 位訪客