Dear ATMers,
The secondary of our 26 incher has a diameter approaching 10 inches. The secondary is heavy and thus the spider holding it must be strong enough.
Thus the spider is constructed by solid thick aluminium stripe inside of thin bronze rods. The secondary will sit on the 10 inch wooden base atop the 30 inches diameter secondary ring, also make by same 3/4” plywood.
The secondary mirror will be mounted onto this spider very soon to put the whole spider into test.
Best regards
Chan Yuk Lun
12 March 2015
The making of 26 inch Cassegrain - 17, Main Spider Finished.
-
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
The making of 26 inch Cassegrain - 17, Main Spider Finished.
- 附加檔案
-
- 42.jpg
- Details for the lower fixing point. The wooden circular ring is the secondary ring of the OTA.
- (281.97 KiB) 已下載 3131 次
-
- 41.jpg
- Details for upper fixing point of the spider. The circular base is the seat for the secondary mirror.
- (287.87 KiB) 已下載 3131 次
-
- 40.jpg
- The spider for secondary hyperbolic mirror.
- (431.19 KiB) 已下載 3131 次
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 27 位訪客