是不是有种卡式望远镜 副镜也是个凹面而不是球面?
要找這些資料,可以用
http://www.google.com ,不必問人,可以有中文翻譯,例如:-
http://translate.google.com.hk/translat ... W%26sa%3DG
http://www.google.com ,不必問人,可以有中文翻譯,例如:-
http://translate.google.com.hk/translat ... W%26sa%3DG
-
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
Dear Mr. tang,鄧登凳 寫:小弟孤陋寡聞, 未聽過用凹面鏡(不論是球體或雙曲)作為副鏡的望遠鏡系統。
卡式望遠鏡, 不論施卡式(SCT)、馬卡式(MCT)、里奇-克萊琴式(RCT), 副鏡都等同一個倍增鏡(barrow), 所以都是用凸鏡的。至於是球面、雙曲面、還是什麼修正曲面, 是在乎製作的難易和效果中的彗差、平場程度兩者間的平衡。
Yes there exists such telescope with a concave secondary. This is called Gregory telescope, they produce erect images. They require an ellipsoid concave secondary mirror.
Such telesocpe are not common because they require extra long tube length.
Best regards
Chan Yuk Lun
Dear Mr Chan,Chanlunlun 寫:
Dear Mr. tang,
Yes there exists such telescope with a concave secondary. This is called Gregory telescope, they produce erect images. They require an ellipsoid concave secondary mirror.
Such telesocpe are not common because they require extra long tube length.
Best regards
Chan Yuk Lun
I see. Thanks for the information.
According to the diagram, the secondary mirror is placed beyond the focal point of the primay (that is why it is so long). For a typical cassegrain, the secondary is placed well before the focal point of the primary.
So, I have two questions
1. Is Gregory-telescope still a type of Cassegrain?
2. Are there commercially available Gregory-telescopes now?
Best Regards,
Tang
那種用凹面鏡做副鏡的叫格式鏡 (Gregorian 格高里式), 從前看望遠鏡設計的分類表, 它不屬於卡式類, 是獨立成一類的.
它副鏡是一個橢球凹面, 其中一個焦平面和主鏡的焦平面在同一個位置, 另一個焦點在主鏡後.
特點是焦距長、成像是正像, 這支口徑 4" 的鏡仔, 合成焦距比 C11 還要長:
http://www.hkastroforum.net/viewtopic.php?t=4604
它副鏡是一個橢球凹面, 其中一個焦平面和主鏡的焦平面在同一個位置, 另一個焦點在主鏡後.
特點是焦距長、成像是正像, 這支口徑 4" 的鏡仔, 合成焦距比 C11 還要長:
http://www.hkastroforum.net/viewtopic.php?t=4604
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 16 位訪客