有 197 筆資料符合您搜尋的條件

mbike
週四 21 2月, 2019 09:37
版面: Raspberry Pi 自動導星裝置 diy Autoguiding
主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
回覆: 10
觀看: 4889

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

universe24 寫:
週三 20 2月, 2019 11:21
按理说来,能支持 450D,其他同个系列的型号也应该会支持吧?
还是说连接过后,系统会辨识是否450D?
我發覺450d的commands,與其他較新型號的canon DSLR 相機不相同,先前的 web page 已經能夠控製到大部分Canon 相機,只是eos-m和部分型號例如450d需要不同的控制command.
mbike
週二 19 2月, 2019 20:15
版面: Raspberry Pi 自動導星裝置 diy Autoguiding
主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
回覆: 10
觀看: 4889

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

AstroEx 3.3 被修改用於控制M3和450D。 請在第一頁下載圖像文件。 這圖像文件在樹莓Pi 3B 和 3B +上正常工作。 局限性: 無法從AstroEX設置ISO(gphoto2 --set-config ISO = XXX不起作用)。 您必須通過EOS-M攝像機的按鈕進行設置。 應該只支持EOS M10,M100,M2,M3,M5,M50,M6( http://gphoto.org/proj/libgphoto2/support.php ),但是eos-m的AstroEx 3.3 僅用我的M3測試過。 從AstroEx 3.3更改/升級: 1. web interface f...
mbike
週日 17 2月, 2019 18:03
版面: 天文攝影 Astrophotography
主題: 來自屯門的玩家(21年11月10日 M31 黑白))
回覆: 158
觀看: 99566

Re: 來自屯門的新手 (26-Dec-2018 火焰、馬頭、獵戶星雲)

martin070 寫:
週二 22 5月, 2018 16:19
Canon 1500D EF-S 55-250 @250 F5.6
我支EFS鏡頭後座鋸短左,所以放到濾鏡
/quote]
我也有同一支鏡,你用鋸把突出的部分直接鋸掉?會有很多塵和碎片。
mbike
週日 17 2月, 2019 14:55
版面: 天文攝影 Astrophotography
主題: Moon, 15 Feb 2019
回覆: 3
觀看: 436

Re: Moon, 15 Feb 2019

加油呀,你用軟件還是用快門繩控制M5?
AstroEx 可以控制M5。
mbike
週日 17 2月, 2019 14:52
版面: Raspberry Pi 自動導星裝置 diy Autoguiding
主題: Raspberry Pi 2 and Pi 3 for Autoguiding+DSLR+GOTO
回覆: 84
觀看: 404644

Re: Raspberry Pi 2 and Pi 3 for Autoguiding+DSLR+GOTO

因為Sampson 的AstroEx ,令我再次學習電腦語言,學習如何使用command控制我的無反相機,之前我只能用紅外線控制canon m3,現在我主要用AstroEx做guiding 和遙控M3,或用Chdk 拍攝星,而AstroEx和chdk是兩個不同的操作方向,希望各位有興趣的同好繼續努力、測試及提供意見😄 多謝各位鼓勵,其實 AstroEx 只是將一些天文和拍攝軟件預載的 raspberry pi Linux OS,網路上也有許多這樣的 OS,AstroEx 再厲害的都只是安裝別人已寫好的軟件,但希望這炒什錦的 os 能符合某些攝影同好的需要,更希望藉着這華語平台介紹 Linux ...
mbike
週四 14 2月, 2019 23:05
版面: Raspberry Pi 自動導星裝置 diy Autoguiding
主題: Raspberry Pi 2 and Pi 3 for Autoguiding+DSLR+GOTO
回覆: 84
觀看: 404644

Re: Raspberry Pi 2 and Pi 3 for Autoguiding+DSLR+GOTO

下一個版本的 AstroEx,一定更加厲害😍😍😍😍
mbike
週一 11 2月, 2019 18:52
版面: 花鳥蟲魚 Natural World
主題: 香港影花鳥蟲魚的機會始終多過星星
回覆: 65
觀看: 29570

Re: 香港影花鳥蟲魚的機會始終多過星星

[完美計劃]
good pictures of wild life
mbike
週四 07 2月, 2019 22:50
版面: 香港遥控天文有限公司
主題: 香港天文論壇專題講座 Hong Kong AstroForum Special Lecture in Astronomy 23/2/2019
回覆: 19
觀看: 6578

Re: 香港天文論壇專題講座 Hong Kong AstroForum Special Lecture in Astronomy

HK.Raymond.Tse 寫:
週四 07 2月, 2019 09:36
Dear Tommy,

Pls enrol 1seat for me.

Raymond Tse
please use the following link to register.

https://form.jotform.me/ericwcc/lecture ... on-march-3
mbike
週三 06 2月, 2019 19:25
版面: 花鳥蟲魚 Natural World
主題: Happy New Year to all my friends.
回覆: 5
觀看: 1207

Re: Happy New Year to all my friends.

恭喜發財 :D :D :D
mbike
週五 25 1月, 2019 08:53
版面: 花鳥蟲魚 Natural World
主題: 香港影花鳥蟲魚的機會始終多過星星
回覆: 65
觀看: 29570

Re: 香港影花鳥蟲魚的機會始終多過星星

sampson 寫:
週四 17 1月, 2019 20:52
18-11-30.jpg
很有趣的昆蟲, 背脊上有一條突出物。
mbike
週日 23 12月, 2018 15:30
版面: Raspberry Pi 自動導星裝置 diy Autoguiding
主題: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polemaster)
回覆: 68
觀看: 16777215

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

使用web control:以browser 開10.0.0.1, 十分穩定。 Kstar 的 舊版本不穩定,而每一次更新版本的穩定性都改善了😊。你可以在X terminal輸入以下command更新至3.0.0 sudo apt-get update sudo apt-get dist-upgrade 怪不得楼主做了web control,我深度的用用。也期待ekos能更成熟些。 [茶] 我升級到Kstars3.0.0, indi-gphoto 升級到 version 2.6~201812201223~ubuntu18.04.1, 但是 ekos 無法控制佳能M3, 用web contro...
mbike
週六 22 12月, 2018 07:53
版面: Raspberry Pi 自動導星裝置 diy Autoguiding
主題: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polemaster)
回覆: 68
觀看: 16777215

Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)

几次用下来,稳定性真是不佳(可能也是本人的水平和运气较差) [壓力] , 遇到的问题有 1. qhy5L2在PHD2中开始loop时总报错,换indi-web启动驱动后好了些 2.Kstar、ekos中拍摄中频繁闪退 3.ekos图像解析功能页不知哪个条件没具备造成按钮都是虚的不能操作,不断的重启indi和ekos,莫名其妙的由好了。 使用web control:以browser 開10.0.0.1, 十分穩定。 Kstar 的 舊版本不穩定,而每一次更新版本的穩定性都改善了😊。你可以在X terminal輸入以下command更新至3.0.0 sudo apt-get update sud...
mbike
週五 14 12月, 2018 21:58
版面: Raspberry Pi 自動導星裝置 diy Autoguiding
主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
回覆: 10
觀看: 4889

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

ligphoto2: 2.5.19 (M3 did not capture image properly via web control for version 2.5.20, 2.5.21 and development version); The main developer, Marcus Meissner replied: "There was a bug I introduced in git... I fixed it in libgphoto2 git, it will be in 2.5.22. Ciao, Marcus" Once the bug is fixed, I s...
mbike
週三 12 12月, 2018 14:03
版面: Raspberry Pi 自動導星裝置 diy Autoguiding
主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
回覆: 10
觀看: 4889

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

Some files were modified for Canon EOS 450D. The kernel was upgraded to 4.14.87-v7. The new image is available for download.


astroex 450d.png
EOS 450D operation
astroex 450d.png (275.81 KiB) 已瀏覽 4792 次

astroex kernel 41487v7.png
kernel was upgraded
astroex kernel 41487v7.png (396.85 KiB) 已瀏覽 4792 次
mbike
週二 11 12月, 2018 07:35
版面: Raspberry Pi 自動導星裝置 diy Autoguiding
主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
回覆: 10
觀看: 4889

AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

Thanks to the effort made by QK Sampson, AstroEx3 was upgraded from AstroEx2. AstroEx2 and AstroEx3 can control most Nikon and Canon Cameras (except my EOS M3). On AstroEx2 version, I modified some gphoto2 comands so my Canon EOS M3 can be operated. AstroEx 3.3 was modified for controlling M3 and 45...

前往進階搜尋