有 3821 筆資料符合您搜尋的條件

Chanlunlun
週一 20 2月, 2023 07:24
版面: 自製天文望遠鏡 Amateur Telescope Making
主題: 自制一台磨镜机
回覆: 5
觀看: 3141

Re: 自制一台磨镜机

真令人羡慕,家中有這麽大的地方,看來磨个一米鏡子也沒問題了。好棒的磨鏡机。
Chanlunlun
週四 16 2月, 2023 20:14
版面: 天文攝影 Astrophotography
主題: M45-終於影到
回覆: 4
觀看: 730

Re: M45-終於影到

It's beautiful.
Chanlunlun
週一 30 3月, 2020 20:28
版面: 天文台 Observatory
主題: 中大科普中心天文台圓大修後記(續)
回覆: 36
觀看: 10778

Re: 中大科普中心天文台圓大修後記(續)

蔡sir 寫:
週六 28 3月, 2020 18:10
Mr.Chan,10'dome 跟 15'dome相比,無論大小重量都差太遠,可謂小巫見大巫.
不過,從維修過程穫到的經過驗,都是實戰的總結.
他日老兄的15'dome做大修時,我也希望可以來觀摩學習.

很快,只要正常上課之日,便是大修開始之時。
Chanlunlun
週六 28 3月, 2020 10:00
版面: 天文台 Observatory
主題: 中大科普中心天文台圓大修後記(續)
回覆: 36
觀看: 10778

Re: 中大科普中心天文台圓大修後記(續)

蔡sir 寫:
週四 26 3月, 2020 21:43
後記
這次大修可算是完成,吃力之餘,過程一點也不順利,可謂困難重重,效果也和期望有落差,限於物料採購的局限,只能在本地搜購,價格高之餘有些還買不到,如果可以用網購將會方便得多。
例如:圓頂水平轉動.一定要把接觸面徹底磨平,只容許承托輪抬著圓頂運動。水平限位的圓型膠片全部也要換裝帶軸承的膠輪。此外還要用把圍牆的水平面用水平儀從新精確調正,再用適當長度的鋼管或柱承托。
把接觸面徹底磨平是很大工程 ,真是佩服得五體投地。
Chanlunlun
週六 28 3月, 2020 09:00
版面: 天文台 Observatory
主題: 中大科普中心天文台圓大修後記(續)
回覆: 36
觀看: 10778

Re: 中大科普中心天文台圓大修後記(續)

若然放棄摩擦輪改用鏈條傳動,這台圓頂的運轉效果肯定很理想。 至於天窗的修理是還是相對令人滿意的。只是捕線器用料剛度畧為不足,鋼索在拉動過程中偶爾被卡在滑輪和翼型鋁片之間,用高强度的鋼片就會很理想。 鋼索收放裝置疊繞現象.解决方法就是用一個直徑大坑槽深的繞線器,任何時候活門出現阻力,鋼索也不會再有從綫槽鬆脱的問題了。 我個人認為,用鋼索拖曳始終不是理想的方法,一是保養麻煩,二是鋼索一旦被意外拉斷 , 會對使用者構成危險。 改良方案: 1. 把繁覆的鋼索牽引裝置清除,在活門中央装上帶耳鏈條,同樣用鏈輪帶動。或者用同步帶也是另一個選擇。再在活門前沿加上倒扣滑輪來 防止脱落,簡單利落。 2. 電路中...
Chanlunlun
週六 28 3月, 2020 08:57
版面: 天文台 Observatory
主題: 中大科普中心天文台圓大修後記(續)
回覆: 36
觀看: 10778

Re: 中大科普中心天文台圓大修後記(續)

Also as per our experience, the dome is made of fiberglass and its surface is quite resistant to weathering. UV light doesn't seem to have much effect on it and most of the time it is dirts that accumulating of dome surface making it look tarnished. We routinely clean the dome every year and the sur...
Chanlunlun
週六 28 3月, 2020 08:42
版面: 天文台 Observatory
主題: 中大科普中心天文台圓大修後記(續)
回覆: 36
觀看: 10778

Re: 中大科普中心天文台圓大修後記(續)

After more than 10 years of service, our 15 feet dome ( same manufacturer ) also needed to get some maintenance. We need to replace the tension wire to open and shut down the dome shutter and to remake the azimuth driving units for dome rotation. We planed to start work in February as the school fin...
Chanlunlun
週二 16 4月, 2019 07:57
版面: 天文攝影 Astrophotography
主題: 剛去完馬爾代夫,影左小小星空相
回覆: 8
觀看: 2436

Re: 剛去完馬爾代夫,影左小小星空相

小人 寫:
週一 15 4月, 2019 15:40
Kani島,其實附近都幾光,已經揾個最黑嘅地方影
是否 club Med 的 Kani 島?是搭水上飛機去嗎?如果要的話應該附近環境頗黑。
當然也有可能島本身燈光火著。
Chanlunlun
週二 16 4月, 2019 07:44
版面: 自製天文儀器 diy Astro Equipment
主題: DIY Canon M3 Remote Timer Shutter
回覆: 7
觀看: 5153

Re: DIY Canon M3 Remote Timer Shutter

RC6是什麼來的? 是不是紅外缐二極管? 鴨尞街有得賣嗎?
個 remoter 是什麼牌子?是否鴨尞街也有賣?
我也很想做一個好像你一般B掣搖控,謝。
Chanlunlun
週二 29 1月, 2019 19:03
版面: 天文活動消息 Astro Activity News
主題: 20 inch telescope will proceed PTC tonite(29 Jan 2019)
回覆: 0
觀看: 2282

20 inch telescope will proceed PTC tonite(29 Jan 2019)

As title. Tonight the transparency is much better than yesterday and hopefully, those galaxies could not be seen yesternight can be seen tonight.
Chanlunlun
週六 26 1月, 2019 17:23
版面: 天文活動消息 Astro Activity News
主題: 20 inch telescope will proceed ptc tonite (26 Jan)
回覆: 0
觀看: 2070

20 inch telescope will proceed ptc tonite (26 Jan)

雖然今天透明度奇差,不過都去博一博。
Chanlunlun
週四 03 1月, 2019 22:36
版面: 談天說地 Chatting Square
主題: Happy New Year 2019
回覆: 7
觀看: 3265

Re: Happy New Year 2019

Long Time no see, Boss Kwan.

Happy new year to you and to all.
Chanlunlun
週一 29 10月, 2018 17:20
版面: 天文活動消息 Astro Activity News
主題: 20 inc telescope will proceed PTC tonite (29 Oct 2018)
回覆: 1
觀看: 2199

20 inc telescope will proceed PTC tonite (29 Oct 2018)

As tile. Tonite's theme: very very dim planetary and some very faint open clusters and galaxy. The telescope will leave at around 9:00 p.m.

前往進階搜尋